Digital indicator M2 melt pressure strain gauges
Item description
The M2-1MR5B.020X.570CD is a 5-digit meter for power / weight measuring via strain gauges with switching contact of 80% alignment and visual limit value monitoring via the display. Configuration happens via 4 front keys or via an optional PC-software. For further evaluations two switching points are optional available. Selectable software functions, a direct limit value adjustment in operating mode and the compact installation depth of 89mm create a solid device concept.
Digital indicator M3 melt pressure strain gauges
Item description
The M3-1MR5B.020X.S70BD is a 5-digit meter for measuring power / weight via strain gauges with switching contact for 80% alignment and a visual limit value monitoring via the display. The configuration happens via four front keys or via an optional PC-software. Optional two analog outputs, interfaces RS232/RS485 and up to 8 switching points are available. Select- able software functions and a direct limit value adjustment in operating mode complete the modern device concept.
Panel meter PM5 melt pressure strain gauges
Item description
The PM5.020X.1S70D with 4-wire-system and additional calibration contact for the 80%- alignment, is designed for sensor sizes which are based on strain gauges. The latter must not necessarily be used, as the device is suitable for any other strain gauge measuring. Therefor the device provides a regulated 10V-bridge supply. The 5-digit display shows the measure- ments, respectively the scaled value of the measured variable. Optionally available are 4 changeover relays for the monitoring of limit values, interfaces RS232/RS485 for data trans- fer to/from the device and analog outputs 0-10VDC, 4-20mA or 0-20mA for further evaluation.
Technical Data
Housing | 96 x 48 mm |
Display | 5-digit 14 mm digit height Colour: red, green, orange or blue display |
Range displayed | -19999 to 99999 |
Operation | front panel keyboard protection class IP65 |
Input | DMS / Melt pressure: 1 mV/V, 2 mV/V, 3.3 mV/V free up to 4 mV/V with 80% calibration Digital input: <2.4V OFF, >10V ON, max. 30 VDC |
Analogue Output | - |
Switch point | 2 relays (change-over contact) 250 V / 5 AAC, 30 V / 5 ADC |
Interface | - |
Power supply | 230 VAC 10-30 VDC galvanic isolated Other voltage supplies on demand! |
Sensor supply | Feeding 10 VDC / 20-40 mA / 250-500 Ohm |
Software properties |
|
Downloads | Data sheet and price list Manual |
Housing | 96 x 48 mm |
Display | 5-digit 14 mm digit height Colour: red, green, orange or blue display |
Range displayed | -19999 to 99999 |
Operation | front panel keyboard protection class IP65 |
Input | DMS / Melt pressure: 1 mV/V, 2 mV/V, 3.3 mV/V free up to 4 mV/V with 80% calibration Digital input: <2.4V OFF, >10V ON, max. 30 VDC |
Analogue Output | 2 analog outputs 0/4-20 mA / 0-10 VDC / 16 Bit |
Switch point | 2 or 4 relays (change-over contacts) 250 V / 5 AAC, 30 V / 5 ADC or 8 PhotoMos outputs (NOC) 30 V / 0.4 A AC/DC |
Interface | RS232 or RS485 galvanic isolated Alternatively to analog output 2 |
Power supply | 100-240 VAC 50/60 Hz / DC +/- 10% 10-40 VDC / 18-30 VAC 50/60Hz |
Sensor supply | Feeding 10 VDC / 20-40 mA / 250-500 Ohm |
Software properties |
|
Downloads | Data sheet and price list Manual |
Housing | 96 x 48 mm |
Display | 5-digit 14 mm digit height Colour: red |
Range displayed | -9999...99999 |
Operation | front panel keyboard protection class IP65 |
Input | Strain gauge / Melt pressure: 1 mV/V, 2 mV/V, 3.3 mV/V frei bis 6 mV/V with 80% calibration Digital input: <2.4V OFF, >10V ON, max. 30 VDC |
Analogue Output | 0-20 mA Burden ≤500Ohm 12Bit 4-20 mA Burden ≤500Ohm 12Bit 0-10 VDC Burden ≥100kOhm 12Bit |
Switch point | 2 or 4 relays (change-over contacts) 250 V / 5 AAC, 30 V / 5 ADC |
Interface | RS232 or RS485 galvanic isolated |
Power supply | 100-240 VAC 50/60 Hz / DC +/- 10% 10-40 VDC / 18-30 VAC 50/60Hz |
Sensor supply | Bridge supply 10 VDC / 20-50 mA / 200-500 Ohm |
Software properties |
|
Downloads | Data sheet and price list Manual |