Digital panel meter PZ5 two-channel measurement

Digital panel meter PZ5 two-channel measurement
96 x 48 mm

Item description

The PZ5.0001.1540 was designed for the allocation of two sensors with direct voltage/direct current signals. Configurable via 4 front keys or via the optional PC-software PM-TOOL. The 5-digit display shows the measurements, respectively the calculated value of the measured variable. Optionally available are 4 changeover relays for the monitoring of limit values, interfaces RS232/RS485 for data transfer to/from the device and analog outputs 0-10 VDC, 4-20 mA or 0-20 mA for further evaluation. Selectable software functions, an external channel switching,
also a 24 Bit resolution characterise an established device for industrial use.

Item description

Technical Data

Housing	96 x 48 mm
Display	5-digit 14 mm digit height Colour: red
Range displayed	-9999…99999
Operation	front panel keyboard protection class IP54
Input	2x 0/4-20mA, 0-10VDC Digital input: <2.4V OFF, >10V ON, max. 30 VDC
Analogue Output	0-20 mA Burden ≤500Ohm 12Bit 4-20 mA Burden ≤500Ohm 12Bit 0-10 VDC Burden ≥100kOhm 12Bit
Switch point	2 or 4 relays (change-over contacts) 250 V / 5 AAC, 30 V / 5 ADC
Interface	RS232 or RS485 galvanic isolated
Power supply	230 VAC 24 VDC +/-10% galvanic isolated
Sensor supply	10 VDC / 20 mA 24 VDC / 50 mA
Software properties	offsetting of the channels via addition, substraction, multiplication or division manual or automatic switch-over between channels and calculating channel min/max-memory 30 additional adjustable supporting points per channel display flashing at threshold exceedance/undercut adjustable zero-key for the triggering of Hold, Tara, channel switching flexible alarm system with adjustable delay times programming interlock via access code
Downloads	Data sheet and price list Manual